Power Cord Design.

 

These are the two ways that a power cord can be put together.  Please specify when you order if you want number 1 or number 2.  If you have any questions, please email.

 

 

This is the form number 1 (one).  Please notice how the ground on the wall plug is compared to the grove of the IEC on the other end.  Please make sure you state what way you want when you order.

 

The ground on the above power cord has the ground on the wall plug so when you bend the power cord the ground pin goes into the groove on the IEC.  So when you have the power cord in a straight line laying flat, both grounds are up.

 

this is picture number 2 (two).

Please notice on this picture the ground on the wall plug is 180 degree from the number one picture.